Tips to work your obd2 autoscanner VAG COM

On-Board Diagnostics Version II renault can clip scanner (OBD-II) is a standardized system to help determine common problems in a vehicle. Since 1996, vehicles produced in the United States are OBD-II compliant. The  VAG COM OBD-II AutoScanner is a device that you can connect to your vehicle to help diagnose what is causing problems. Once you connect this device to your vehicle, you will receive a code that you can use to determine problems with your car.
1. Insert the "DTC Lookup" CD into your computer's disc drive and close it. Click on the "Install" button on the screen that appears and follow the onscreen instructions to install the software. Click "Finish" when prompted and remove the CD from the tray. Open the program that  VAG COM you just installed and leave it up on your computer.

2. Locate the "Data Link" connection for your vehicle. Every vehicle made after 1996 in the United States has one and it is typically located underneath the dashboard on the driver's side. If it is not located here, there will be a label explaining where it is located in your vehicle.

3. Connect the data cable from the  VAG COM  scanner to the "Data Link" connection. Remove the cover over the connection if one is present. When you insert the cable, you will notice that the power for the OBD-II is on. It is now ready for use.

4. Press the "Up" or "Down" button to highlight the "Read Codes" option on the main menu and press the "Enter" button to select. Wait a few

moments as the obd2 performs a diagnostic scan. If it detects problems, a five-digit code will appear on the screen along with a message telling you how many codes it detected.