CReader V is newly developed by LAUNCH, specially Outil de crochetage automobile designed for car owners or DIYs to diagnose
any vehicle compatible with EOBD. It can not only read/clear DTCs, but
also read live data in 2 modes, and perform many special tests.
Tri-languages make it operation easily for a technician. The feature of
upgrading online ensures it can test new model cars and/or functions in
the future.
This item is especially for VW/Audi!
The
OVS6 code scanner is specially designed for most Volkswagen and Audis
which were sold to worldwide in 1990 or
Outil de crochetage automobile after 1990. And if a VW/AUDI has
a 16-pin OBD2 style data Link Connector (DTC), the code reader will
certainly work.
If it has an old-style Data link connector
(DTC),then it depends on whether there are 4 or 3 wires connecting to
the pins .If there are 4 wires , each connecting a pin ,then it will
work .If there are only 3 wires ,leaving one pin disconnected ,then it
will work.
For VW/AUDI with old-style Data
VAG Diagnostic Tool Link Connector (DTC), you need to have a cabling adapter which is not included in this product.
Features:
A.
Works with Volkswagen and Audi (Audi/ Seat/ Skoda/ Jetta/ Golf /
Beetle/ Touareg / GTI/ Passat and more) sold worldwide since 1990.
B.
Reads and erases Diagnostic Trouble Codes (DTCs) of engine, ABS,
airbags, transmission, radio, climate control (A/C), cent, etc. Steering
wheel, instruments, immobilizer, etc. (18 Systems)
C. Reads and
clears generic trouble codes of cars using ISO 9141-2 ("CARB"), ISO
14230 ("KWP-2000") and ISO- 15765 ("CAN") protocols
D. Turns off MIL
Renault CAN Clip lights of engine, airbags, ABS, A/T and most other systems
E.C.A.N.(Controller Area Network) capability
F. Resets oil service light (depends on vehicle support)
没有评论:
发表评论