Ops dis+sss for bmw toyota id4c key

OPS is designed for Outil de crochetage automobile encoding, individualizing and programming (CIP) via the Software Service Station   toyota id4c key (SSS) and envisaged for use as part of the BMW diagnostic system (DIS) and Group Tester One (GT1). It is intended for testing and programming tasks from the E65 series, replacing diagnostic head.
An OPPS is intended for rapid programming of control units.
When operated SSS, no diagnostic or technical measuring procedures are possible, as no measuring technology is incorporated; in this case, OPPS / OPS are used predominantly for   toyota id4c key programming control units (flashing). Communication with the vehicle can be performed both via the MOST and via the OBD interface. The OBD interface is required for the power supply to the OPPS / OPS and has communication properties via which the vehicle can be identified and the data to be programmed can be determined. From CIP version 7.0, it is possible to delete fault code memories via OPPS / OPS.
VAG Diagnostic Tool :
Vehicle interface via OBD2 socket:
E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, E83, E85, E86, E38 (OBD2), E39 (OBD2), E46 (OBD2), E52, E53, R56, R50, R52, R53
toyota id4c key :
(1) Vehicle interface via OBD2 socket:
E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, E83, R56, R50, R52, R53
(2) MOST compatibility (multichannel programming):
E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, R56, R50, R52, R53
Accessories:
1. OPS multiplexer (Orange Head)
2. OBD2 diagnostic cable
3. LAN cable
4. OPS MOST cable
5. 120G HDD with preinstalled SSS V32 for IBM T30
6. 120G HDD with preinstalled DIS V57 for IBM T30